Let The Outside In Unisex T-Shirt: How the Print Holds Up
By Serenity Forge Store | Published: 2026-11-02
Category: Tips & Care
Keep the Let The Outside In Unisex T-Shirt print sharp with a wash-and-dry routine built for 100% combed ringspun cotton. Follow these steps to avoid cracks and fading.
Quick answer
Wash the Let The Outside In Unisex T-Shirt inside out in cold water on a gentle cycle, then air-dry it. This routine protects the print on its 100% combed ringspun cotton fabric and helps prevent cracking and fading.
Why this cotton tee needs a gentler routine
The Let The Outside In Unisex T-Shirt is made from 4.3 oz. 100% combed ringspun cotton, a soft, smooth fabric that feels comfortable against the skin. That same smooth surface means the printed design sits close to the fibers, so harsh washing can wear it down faster than you might expect.
Because the shirt is made to order, it arrives as a finished piece rather than a blank you can easily replace. A few careful habits from the first wash onward will keep the print looking crisp for longer.
The real risks: heat, friction, and harsh detergent
Most print damage comes from three things: high heat, abrasion inside the wash drum, and detergents with bleaching agents. Hot water and a hot dryer can soften the ink and cause it to crack along fold lines. Tumbling with heavy items like jeans or towels creates friction that scuffs the print.
You do not need special products. A mild, bleach-free detergent and a little extra care with sorting will do more for print longevity than any single additive.
Step-by-step print care for the Let The Outside In Tee
- Turn the shirt inside out before washing: Flip the tee inside out and close any zippers or buttons on other garments in the load. This keeps the printed side away from the drum and reduces friction. Check that the print is fully protected before the shirt goes into the machine.
- Wash in cold water on a gentle cycle: Select a cold-water setting (around 30°C / 85°F or lower) and a gentle or delicate cycle. Hot water can weaken the bond between the ink and the cotton fibers. If your machine has a hand-wash or extra-gentle option, use it for the first few washes.
- Use a mild, bleach-free detergent: Choose a liquid detergent labeled free of bleach and optical brighteners. Avoid fabric softener, which can leave a residue that dulls the print over time. Measure detergent carefully; excess soap traps dirt and can cause repeated washing.
- Skip the dryer and air-dry instead: Hang the shirt inside out on a line or drying rack away from direct sunlight. If you must use a dryer, choose the lowest heat setting and remove the shirt while it is still slightly damp. High heat is the fastest way to crack a print, so air-drying is always the safer choice.
- Store folded, not hung: Fold the tee and store it in a drawer or on a shelf. Hanging a cotton knit can stretch the shoulders and distort the print area over time. Keep the shirt away from damp areas to prevent mildew on the cotton.
Product facts
- Let The Outside In Unisex T-Shirt: 4.3 oz., 100% combed ringspun cotton Combed ringspun cotton is smooth and soft, so the print sits on a fine surface that responds well to gentle washing and air-drying.
Let The Outside In Unisex T-Shirt
